POLYNOR FIXO POLYURETHAN ADHESIVE

POLYNOR FIXO POLYURETHAN ADHESIVE

Professional heat-insulating polyurethane adhesive

Professional heat-insulating polyurethane adhesive

BENEFITS

High bond strength

Precise and easy to dose

 The glue line has low thermal conductivity

Possibility to apply on a vertical surface

Foamed formula reduces glue consumption during use

High strength adhesion for horizontal and vertical release with a huge variety of materials (concrete, roof tiles, wall blocks, brick, plaster, stone, wood, metal)

DESCRIPTION

POLYNOR FIXO is a professional, one-component, thermal insulation, polyurethane adhesive for high-quality fixation of boards of extruded EPS (XPS), extruded polystyrene foam PSB (EPS), polyurethane foam (PU and PIR) and mineral wool, when installing internal thermal insulation systems, as well as external thermal insulation of facades, both in new construction and when renovating old buildings. 

It is used for gluing decorative panels made of plastic, wood, tin, drywall, etc. to a variety of building materials.

POLYNOR FIXO is a professional, one-component, thermal insulation, polyurethane adhesive for high-quality fixation of boards of extruded EPS (XPS), extruded polystyrene foam PSB (EPS), polyurethane foam (PU and PIR) and mineral wool, when installing internal thermal insulation systems, as well as external thermal insulation of facades, both in new construction and when renovating old buildings. 

It is used for gluing decorative panels made of plastic, wood, tin, drywall, etc. to a variety of building materials.

USING OPTIONS

1. High-quality fixation of boards of extruded EPS (XPS), extruded polystyrene foam PSB (EPS), polyurethane foam (PU and PIR) and mineral wool

2. Filling of joints and open areas between insulation panels

3. Gluing decorative panels made of plastic, wood, tin, drywall, etc. to a variety of building materials.

SPECIFICATIONS

  • The basis: .............................................................polyurethane prepolymer
  • Curing mechanism:...........................................polymerization from moisture in the air
  • Skin formation *:.................................................about 8 minutes
  • Curing speed *: ..................................................about 95 minutes
  • Performance: .....................................................from 12 m2
  • Density of freely foamed adhesive: ............23 kg / m3
  • Surface temperature: ......................................from 0 ° С to + 35 ° С
  • Application temperature: ..............................from 0 ° С to + 30 ° С
  • Can temperature: .............................................from 10 ° С to + 30 ° С
  • Thermal conductivity coefficient: ...............0.029 W / (m * K)
  • Shrinkage: ...........................................................none
  • Heat resistance: ................................................from –60 ° С to + 100 ° С

             * The mechanical strength of the material is lower than the adhesive properties of the adhesive
  • The basis: ................................................. polyurethane prepolymer
  • Curing mechanism:............................... polymerization from moisture in the air
  • Skin formation *: .................................................... about 8 minutes
  • Curing speed*: about 95 minutes
  • Performance:    from 12 m2
  • Density of freely foamed adhesive: 23 kg / m3
  • Surface temperature: from 0 ° С to + 35 ° С
  • Application temperature: from 0 ° С to + 30 ° С
  • Can temperature: from 10 ° С to + 30 ° С
  • Thermal conductivity coefficient: 0.029 W / (m * K)
  • Shrinkage:     none
  • Heat resistance: from –60 ° С to + 100 ° С
  •  The mechanical strength of the material is lower than the adhesive properties of the adhesive

CERTIFICATES